Secure Idle Enable (2021+) FORScan Code for F-150
Your truck
Add Secure Idle Enable (2021+) to a worksheet
$9.99
Choose the year, trim, engine, and drivetrain. Nothing is filled in until you pick it.
Sample
Sample worksheet
This is a sample of the layout, not a worksheet for your truck. The paid sheet uses the mods you pick and leaves a blank for each original value. You write any change yourself in FORScan.
Sample rows for a 2021 F-150. These are 2021+ addresses. Auto Start/Stop is not in this sample.
| Module | Address | Your original value | Target value | Notes |
|---|---|---|---|---|
| BCM | 726-39-02 | ____________ | xxx0 xxxx xx-- | Sample layout. 2021+ Bambi Mode. |
| ACM | 727-01-01 | ____________ | xxxx xxxx 0x-- | Sample layout. 2021+ Fake Engine Noise. |
| BCM | 726-63-02 | ____________ | xxx0 xxxx xx-- | Sample layout. 2021+ Double Horn Honk Disable. |
Sample rows only. A purchased worksheet is built from your year, trim, engine, drivetrain, and selected mods. Worksheet purchases are non-refundable except where required by law.
Secure Idle Enable (2021+) is a lower-risk, convenience-oriented change for 2021–2026 Ford F-150 trucks, applied with FORScan over an OBD-II adapter. Prevents a 2021+ F-150 from being put in gear if the key fob is away. It is fully reversible and typically takes about 5 minutes to write once your worksheet is in hand.
The change touches the Body Control Module (BCM), and your F-Config worksheet lists all 1 as-built code row with the module, address, and target value. Each row includes a blank for your original value so you can back up before writing changes and roll back later. Security feature - truck cannot be driven if fob leaves the area while engine is running.
Why F-150 owners use it
Security feature - truck cannot be driven if fob leaves the area while engine is running
Worksheet rows
1
Modules
1
Estimated time
~5 min
Compatibility
2021-2026
How you'll apply Secure Idle Enable (2021+)
The DIY process from start to finish — backup-first and, where possible, reversible.
Back up your originals first
Before changing anything, use FORScan to read and record the current value of each of the 1 row in the Body Control Module (BCM). Your worksheet leaves a blank beside every row for exactly this.
Write the worksheet values
Enter the 1 target row from your worksheet one at a time. Most owners finish Secure Idle Enable (2021+) in about 5 minutes with a laptop and a FORScan-compatible OBD-II adapter.
Cycle the ignition and verify
Turn the key off and back on, then confirm the change behaves as expected before moving on. If anything looks off, stop and compare against the originals you recorded.
Roll back anytime
Because Secure Idle Enable (2021+) is fully reversible, you can put every original value back later and return to stock whenever you want.
Compatible F-150 years
Review year-specific FORScan worksheet context before adding this mod to your build.
Before you write values
Make backups, confirm the adapter can see the truck, and review the FAQ before applying worksheet values.
Printable worksheet preview
Customers get a clean worksheet with original-value blanks, target values, completion checks, and module notes.
| Module | Address | Target value | Notes |
|---|---|---|---|
| BCM | 726-64-01 | x1xx xxxx xx-- | SecureIdle_Enable_Cfg: 0=disable, 1=enable |
Risk and safety notes
Convenience-oriented worksheet item that still requires backups, review, and customer judgment.
Required modules
Secure Idle Enable (2021+) FORScan FAQ
Is Secure Idle Enable (2021+) safe to do on my F-150?
It is rated lower risk on F-Config. It is convenience-oriented, but you should still back up your original as-built values before writing anything.
Is Secure Idle Enable (2021+) reversible?
Yes. This change is fully reversible as long as you record your original as-built values first. Your worksheet leaves a blank for each original value so you can roll back to stock.
Which modules does Secure Idle Enable (2021+) change?
It writes 1 code row to the Body Control Module (BCM). Each row is listed in your worksheet with its address and target value.
How long does Secure Idle Enable (2021+) take with FORScan?
Most owners finish Secure Idle Enable (2021+) in about 5 minutes once they have the worksheet, a laptop, and a FORScan-compatible OBD-II adapter.
What F-150 years does Secure Idle Enable (2021+) work on?
Secure Idle Enable (2021+) applies to 2021–2026 F-150 trucks. Compatibility can still vary by trim, package, and module software version, so confirm against your own as-built data.
Related Engine & Drivetrain mods
Other FORScan changes in the same category you can add to the same worksheet.
Auto Start/Stop Disable
Disables Auto Start/Stop by disabling Battery Management System
Fake Engine Noise Disable
Disables the artificial engine sound played through speakers
Hill Descent Control Enable
Enables Hill Descent Control feature
Secure Idle Enable
Prevents a 2015–2020 F-150 from being put in gear if the key fob is away
Auto Start/Stop Disable (2021+)
Disables Auto Start/Stop by tricking the PSCM into thinking a steering event is happening at a stop
Fake Engine Noise Disable (2021+)
Disables the artificial engine sound played through speakers