Auto Start/Stop Disable FORScan Code for F-150
Your truck
Add Auto Start/Stop Disable to a worksheet
$9.99
Choose the year, trim, engine, and drivetrain. Nothing is filled in until you pick it.
Sample
Sample worksheet
This is a sample of the layout, not a worksheet for your truck. The paid sheet uses the mods you pick and leaves a blank for each original value. You write any change yourself in FORScan.
Sample rows for a 2020 F-150. These are 2015-2020 addresses, not the 2021+ map.
| Module | Address | Your original value | Target value | Notes |
|---|---|---|---|---|
| BCM | 726-27-01 | ____________ | xxxx xxx0 xxxx | Sample layout. 2015-2020 Bambi Mode. |
| ACM | 727-01-01 | ____________ | xxxx x0xx xxxx | Sample layout. 2015-2020 Fake Engine Noise. |
| BCM | 726-41-02 | ____________ | xxx0 xxxx xxxx | Sample layout. 2015-2020 Double Horn Honk Disable. |
Sample rows only. A purchased worksheet is built from your year, trim, engine, drivetrain, and selected mods. Worksheet purchases are non-refundable except where required by law.
Auto Start/Stop Disable is a lower-risk, convenience-oriented change for 2015–2020 Ford F-150 trucks, applied with FORScan over an OBD-II adapter. Disables Auto Start/Stop by disabling Battery Management System. It is fully reversible and typically takes about 5 minutes to write once your worksheet is in hand.
The change touches the Body Control Module (BCM), and your F-Config worksheet lists all 3 as-built code rows with the module, address, and target value. Each row includes a blank for your original value so you can back up before writing changes and roll back later. No more annoying engine shutoff at stoplights. Engine stays running.
Why F-150 owners use it
No more annoying engine shutoff at stoplights. Engine stays running.
Where this fits
This page is the 2015–2020 worksheet item. The BCM row does not apply to a 2021 or newer truck. Use Auto Start/Stop Disable (2021+) instead. The 2018 F-150 hub lists the other items on that generation’s address map. Add the row from the worksheet builder, read the backup guide before you write, and check the FAQ for what the paid sheet includes.
Worksheet rows
3
Modules
1
Estimated time
~5 min
Compatibility
2015-2020
How you'll apply Auto Start/Stop Disable
The DIY process from start to finish — backup-first and, where possible, reversible.
Back up your originals first
Before changing anything, use FORScan to read and record the current value of each of the 3 rows in the Body Control Module (BCM). Your worksheet leaves a blank beside every row for exactly this.
Write the worksheet values
Enter the 3 target rows from your worksheet one at a time. Most owners finish Auto Start/Stop Disable in about 5 minutes with a laptop and a FORScan-compatible OBD-II adapter.
Cycle the ignition and verify
Turn the key off and back on, then confirm the change behaves as expected before moving on. If anything looks off, stop and compare against the originals you recorded.
Roll back anytime
Because Auto Start/Stop Disable is fully reversible, you can put every original value back later and return to stock whenever you want.
Compatible F-150 years
Review year-specific FORScan worksheet context before adding this mod to your build.
Before you write values
Make backups, confirm the adapter can see the truck, and review the FAQ before applying worksheet values.
Printable worksheet preview
Customers get a clean worksheet with original-value blanks, target values, completion checks, and module notes.
| Module | Address | Target value | Notes |
|---|---|---|---|
| BCM | 726-48-02 | x0xx xxxx xxxx | Included in worksheet |
| FCIM | 7A7-01-01 | xxxx x0xx xxxx | Optional - disables switch |
| IPC | 720-01-01 | xxxx 1xxx xxxx | Optional - disables stop/start message center |
Risk and safety notes
Convenience-oriented worksheet item that still requires backups, review, and customer judgment.
Required modules
Auto Start/Stop Disable FORScan FAQ
Is Auto Start/Stop Disable safe to do on my F-150?
It is rated lower risk on F-Config. It is convenience-oriented, but you should still back up your original as-built values before writing anything.
Is Auto Start/Stop Disable reversible?
Yes. This change is fully reversible as long as you record your original as-built values first. Your worksheet leaves a blank for each original value so you can roll back to stock.
Which modules does Auto Start/Stop Disable change?
It writes 3 code rows to the Body Control Module (BCM). Each row is listed in your worksheet with its address and target value.
How long does Auto Start/Stop Disable take with FORScan?
Most owners finish Auto Start/Stop Disable in about 5 minutes once they have the worksheet, a laptop, and a FORScan-compatible OBD-II adapter.
What F-150 years does Auto Start/Stop Disable work on?
Auto Start/Stop Disable applies to 2015–2020 F-150 trucks. Compatibility can still vary by trim, package, and module software version, so confirm against your own as-built data.
Anything to watch out for with Auto Start/Stop Disable?
Applies to 2015-2020 trucks. On 2021 and newer this setting lives in a different module — use the 2021+ version of this mod instead.
Related Engine & Drivetrain mods
Other FORScan changes in the same category you can add to the same worksheet.
Fake Engine Noise Disable
Disables the artificial engine sound played through speakers
Hill Descent Control Enable
Enables Hill Descent Control feature
Secure Idle Enable
Prevents a 2015–2020 F-150 from being put in gear if the key fob is away
Auto Start/Stop Disable (2021+)
Disables Auto Start/Stop by tricking the PSCM into thinking a steering event is happening at a stop
Secure Idle Enable (2021+)
Prevents a 2021+ F-150 from being put in gear if the key fob is away
Fake Engine Noise Disable (2021+)
Disables the artificial engine sound played through speakers