Hill Descent Control Enable FORScan Code for F-150
Your truck
Add Hill Descent Control Enable to a worksheet
$9.99
Choose the year, trim, engine, and drivetrain. Nothing is filled in until you pick it.
Sample
Sample worksheet
This is a sample of the layout, not a worksheet for your truck. The paid sheet uses the mods you pick and leaves a blank for each original value. You write any change yourself in FORScan.
Sample rows for a 2020 F-150. These are 2015-2020 addresses, not the 2021+ map.
| Module | Address | Your original value | Target value | Notes |
|---|---|---|---|---|
| BCM | 726-27-01 | ____________ | xxxx xxx0 xxxx | Sample layout. 2015-2020 Bambi Mode. |
| ACM | 727-01-01 | ____________ | xxxx x0xx xxxx | Sample layout. 2015-2020 Fake Engine Noise. |
| BCM | 726-41-02 | ____________ | xxx0 xxxx xxxx | Sample layout. 2015-2020 Double Horn Honk Disable. |
Sample rows only. A purchased worksheet is built from your year, trim, engine, drivetrain, and selected mods. Worksheet purchases are non-refundable except where required by law.
Hill Descent Control Enable is an advanced change that rewards careful backups for 2015–2020 Ford F-150 trucks, applied with FORScan over an OBD-II adapter. Enables Hill Descent Control feature. It is fully reversible and typically takes about 10 minutes to write once your worksheet is in hand.
The change touches the Anti-Lock Brake System (ABS), and your F-Config worksheet lists all 1 as-built code row with the module, address, and target value. Each row includes a blank for your original value so you can back up before writing changes and roll back later. Controlled descent on steep grades without riding the brakes.
Why F-150 owners use it
Controlled descent on steep grades without riding the brakes
Worksheet rows
1
Modules
1
Estimated time
~10 min
Compatibility
2015-2020
How you'll apply Hill Descent Control Enable
The DIY process from start to finish — backup-first and, where possible, reversible.
Back up your originals first
Before changing anything, use FORScan to read and record the current value of each of the 1 row in the Anti-Lock Brake System (ABS). Your worksheet leaves a blank beside every row for exactly this.
Write the worksheet values
Enter the 1 target row from your worksheet one at a time. Most owners finish Hill Descent Control Enable in about 10 minutes with a laptop and a FORScan-compatible OBD-II adapter.
Cycle the ignition and verify
Turn the key off and back on, then confirm the change behaves as expected before moving on. If anything looks off, stop and compare against the originals you recorded.
Roll back anytime
Because Hill Descent Control Enable is fully reversible, you can put every original value back later and return to stock whenever you want.
Compatible F-150 years
Review year-specific FORScan worksheet context before adding this mod to your build.
Before you write values
Make backups, confirm the adapter can see the truck, and review the FAQ before applying worksheet values.
Printable worksheet preview
Customers get a clean worksheet with original-value blanks, target values, completion checks, and module notes.
| Module | Address | Target value | Notes |
|---|---|---|---|
| ABS | 760-03-01 | x*xx xx | 2015-2017: If 0→2, 4→6, 8→A, C→E, 1→3. 2018-2020: If 0→2, 1→3, D→F, 5→7, 4→6 |
Risk and safety notes
Requires careful backups and confidence working in FORScan.
Required modules
Hill Descent Control Enable FORScan FAQ
Is Hill Descent Control Enable safe to do on my F-150?
It is rated advanced. It is well within reach for a careful DIYer, but back up your original values and work through the worksheet one row at a time.
Is Hill Descent Control Enable reversible?
Yes. This change is fully reversible as long as you record your original as-built values first. Your worksheet leaves a blank for each original value so you can roll back to stock.
Which modules does Hill Descent Control Enable change?
It writes 1 code row to the Anti-Lock Brake System (ABS). Each row is listed in your worksheet with its address and target value.
How long does Hill Descent Control Enable take with FORScan?
Most owners finish Hill Descent Control Enable in about 10 minutes once they have the worksheet, a laptop, and a FORScan-compatible OBD-II adapter.
What F-150 years does Hill Descent Control Enable work on?
Hill Descent Control Enable applies to 2015–2020 F-150 trucks. Compatibility can still vary by trim, package, and module software version, so confirm against your own as-built data.
Anything to watch out for with Hill Descent Control Enable?
Requires HDC switch installation for full functionality. Applies to 2015-2020 trucks. On 2021 and newer, Hill Descent Control is bundled into Trail Control and is only available on 2025-2026 Raptor and Tremor.
Related Engine & Drivetrain mods
Other FORScan changes in the same category you can add to the same worksheet.
Auto Start/Stop Disable
Disables Auto Start/Stop by disabling Battery Management System
Fake Engine Noise Disable
Disables the artificial engine sound played through speakers
Secure Idle Enable
Prevents a 2015–2020 F-150 from being put in gear if the key fob is away
Auto Start/Stop Disable (2021+)
Disables Auto Start/Stop by tricking the PSCM into thinking a steering event is happening at a stop
Secure Idle Enable (2021+)
Prevents a 2021+ F-150 from being put in gear if the key fob is away
Fake Engine Noise Disable (2021+)
Disables the artificial engine sound played through speakers