Reverse Tilt Mirrors (2021+) FORScan Code for F-150
Your truck
Add Reverse Tilt Mirrors (2021+) to a worksheet
$9.99
Choose the year, trim, engine, and drivetrain. Nothing is filled in until you pick it.
Sample
Sample worksheet
This is a sample of the layout, not a worksheet for your truck. The paid sheet uses the mods you pick and leaves a blank for each original value. You write any change yourself in FORScan.
Sample rows for a 2021 F-150. These are 2021+ addresses. Auto Start/Stop is not in this sample.
| Module | Address | Your original value | Target value | Notes |
|---|---|---|---|---|
| BCM | 726-39-02 | ____________ | xxx0 xxxx xx-- | Sample layout. 2021+ Bambi Mode. |
| ACM | 727-01-01 | ____________ | xxxx xxxx 0x-- | Sample layout. 2021+ Fake Engine Noise. |
| BCM | 726-63-02 | ____________ | xxx0 xxxx xx-- | Sample layout. 2021+ Double Horn Honk Disable. |
Sample rows only. A purchased worksheet is built from your year, trim, engine, drivetrain, and selected mods. Worksheet purchases are non-refundable except where required by law.
Reverse Tilt Mirrors (2021+) is a lower-risk, convenience-oriented change for 2021–2026 Ford F-150 trucks, applied with FORScan over an OBD-II adapter. Mirrors tilt down when in reverse to see the curb. It is fully reversible and typically takes about 5 minutes to write once your worksheet is in hand.
The change touches the Instrument Panel Cluster (IPC), and your F-Config worksheet lists all 1 as-built code row with the module, address, and target value. Each row includes a blank for your original value so you can back up before writing changes and roll back later. Better visibility when parallel parking.
Why F-150 owners use it
Better visibility when parallel parking
Worksheet rows
1
Modules
1
Estimated time
~5 min
Compatibility
2021-2026
How you'll apply Reverse Tilt Mirrors (2021+)
The DIY process from start to finish — backup-first and, where possible, reversible.
Back up your originals first
Before changing anything, use FORScan to read and record the current value of each of the 1 row in the Instrument Panel Cluster (IPC). Your worksheet leaves a blank beside every row for exactly this.
Write the worksheet values
Enter the 1 target row from your worksheet one at a time. Most owners finish Reverse Tilt Mirrors (2021+) in about 5 minutes with a laptop and a FORScan-compatible OBD-II adapter.
Cycle the ignition and verify
Turn the key off and back on, then confirm the change behaves as expected before moving on. If anything looks off, stop and compare against the originals you recorded.
Roll back anytime
Because Reverse Tilt Mirrors (2021+) is fully reversible, you can put every original value back later and return to stock whenever you want.
Compatible F-150 years
Review year-specific FORScan worksheet context before adding this mod to your build.
Before you write values
Make backups, confirm the adapter can see the truck, and review the FAQ before applying worksheet values.
Power-fold is a mirror-motor code. Blind-spot monitoring is a safety system, and F-Config does not sell it as a worksheet row. BLIS retrofit planning guide
Printable worksheet preview
Customers get a clean worksheet with original-value blanks, target values, completion checks, and module notes.
| Module | Address | Target value | Notes |
|---|---|---|---|
| IPC | 720-02-01 | xxxx x4xx xxxx | Mirrors_Reverse_Tilt (MRT) enabled. Add 4 (hex) to the current nibble value to enable while preserving the other packed bits (Mirrors Autofold / Multiple Chime / Do Not Disturb) — e.g. if default is 0, use 4; if Autofold is also enabled (8), use C. |
Risk and safety notes
Convenience-oriented worksheet item that still requires backups, review, and customer judgment.
Required modules
Reverse Tilt Mirrors (2021+) FORScan FAQ
Is Reverse Tilt Mirrors (2021+) safe to do on my F-150?
It is rated lower risk on F-Config. It is convenience-oriented, but you should still back up your original as-built values before writing anything.
Is Reverse Tilt Mirrors (2021+) reversible?
Yes. This change is fully reversible as long as you record your original as-built values first. Your worksheet leaves a blank for each original value so you can roll back to stock.
Which modules does Reverse Tilt Mirrors (2021+) change?
It writes 1 code row to the Instrument Panel Cluster (IPC). Each row is listed in your worksheet with its address and target value.
How long does Reverse Tilt Mirrors (2021+) take with FORScan?
Most owners finish Reverse Tilt Mirrors (2021+) in about 5 minutes once they have the worksheet, a laptop, and a FORScan-compatible OBD-II adapter.
What F-150 years does Reverse Tilt Mirrors (2021+) work on?
Reverse Tilt Mirrors (2021+) applies to 2021–2026 F-150 trucks. Compatibility can still vary by trim, package, and module software version, so confirm against your own as-built data.
Anything to watch out for with Reverse Tilt Mirrors (2021+)?
Only works for mirrors with the memory feature. Different address than the 2015-2020 version (IPC 720-02-01 vs DDM/PDM 740/741-03-01/-13-01).
Related Mirrors mods
Other FORScan changes in the same category you can add to the same worksheet.
Powerfold Mirrors Enable
Enables power folding mirrors on trucks without memory buttons
Autofold Mirrors
Mirrors automatically fold when locking vehicle
Autofold Mirrors - Lincoln Style
Lincoln-style mirror autofold behavior
Reverse Tilt Mirrors
Mirrors tilt down when in reverse to see curb
Powerfold Mirrors Enable (2021+)
Enables power folding mirrors (power-fold only, no auto-fold-on-lock)
Autofold Mirrors (2021+)
Mirrors automatically fold when locking vehicle (Ford-style, non-Lincoln)