Powerfold Mirrors Enable FORScan Code for F-150
Your truck
Add Powerfold Mirrors Enable to a worksheet
$9.99
Choose the year, trim, engine, and drivetrain. Nothing is filled in until you pick it.
Sample
Sample worksheet
This is a sample of the layout, not a worksheet for your truck. The paid sheet uses the mods you pick and leaves a blank for each original value. You write any change yourself in FORScan.
Sample rows for a 2020 F-150. These are 2015-2020 addresses, not the 2021+ map.
| Module | Address | Your original value | Target value | Notes |
|---|---|---|---|---|
| BCM | 726-27-01 | ____________ | xxxx xxx0 xxxx | Sample layout. 2015-2020 Bambi Mode. |
| ACM | 727-01-01 | ____________ | xxxx x0xx xxxx | Sample layout. 2015-2020 Fake Engine Noise. |
| BCM | 726-41-02 | ____________ | xxx0 xxxx xxxx | Sample layout. 2015-2020 Double Horn Honk Disable. |
Sample rows only. A purchased worksheet is built from your year, trim, engine, drivetrain, and selected mods. Worksheet purchases are non-refundable except where required by law.
Powerfold Mirrors Enable is a lower-risk, convenience-oriented change for 2015–2020 Ford F-150 trucks, applied with FORScan over an OBD-II adapter. Enables power folding mirrors on trucks without memory buttons. It is fully reversible and typically takes about 5 minutes to write once your worksheet is in hand.
The change touches the Driver Door Module (DDM) and Passenger Door Module (PDM), and your F-Config worksheet lists all 2 as-built code rows with the module, address, and target value. Each row includes a blank for your original value so you can back up before writing changes and roll back later. Fold mirrors in tight spaces via switch.
Why F-150 owners use it
Fold mirrors in tight spaces via switch
Free guide before checkout
Read the free power-fold mirror guide first
Power-fold behavior needs mirror motors, door-module support, wiring, and the right control path before configuration helps.
Worksheet rows
2
Modules
2
Estimated time
~5 min
Compatibility
2015-2020
How you'll apply Powerfold Mirrors Enable
The DIY process from start to finish — backup-first and, where possible, reversible.
Back up your originals first
Before changing anything, use FORScan to read and record the current value of each of the 2 rows in the Driver Door Module (DDM) and Passenger Door Module (PDM). Your worksheet leaves a blank beside every row for exactly this.
Write the worksheet values
Enter the 2 target rows from your worksheet one at a time. Most owners finish Powerfold Mirrors Enable in about 5 minutes with a laptop and a FORScan-compatible OBD-II adapter.
Cycle the ignition and verify
Turn the key off and back on, then confirm the change behaves as expected before moving on. If anything looks off, stop and compare against the originals you recorded.
Roll back anytime
Because Powerfold Mirrors Enable is fully reversible, you can put every original value back later and return to stock whenever you want.
Compatible F-150 years
Review year-specific FORScan worksheet context before adding this mod to your build.
Before you write values
Make backups, confirm the adapter can see the truck, and review the FAQ before applying worksheet values.
Power-fold is a mirror-motor code. Blind-spot monitoring is a safety system, and F-Config does not sell it as a worksheet row. BLIS retrofit planning guide
Printable worksheet preview
Customers get a clean worksheet with original-value blanks, target values, completion checks, and module notes.
| Module | Address | Target value | Notes |
|---|---|---|---|
| DDM | 740-03-01 | *xxx xx | 0=disabled, 8=enabled |
| PDM | 741-03-01 | *xxx xx | Included in worksheet |
Risk and safety notes
Convenience-oriented worksheet item that still requires backups, review, and customer judgment.
Required modules
Powerfold Mirrors Enable FORScan FAQ
Is Powerfold Mirrors Enable safe to do on my F-150?
It is rated lower risk on F-Config. It is convenience-oriented, but you should still back up your original as-built values before writing anything.
Is Powerfold Mirrors Enable reversible?
Yes. This change is fully reversible as long as you record your original as-built values first. Your worksheet leaves a blank for each original value so you can roll back to stock.
Which modules does Powerfold Mirrors Enable change?
It writes 2 code rows to the Driver Door Module (DDM) and Passenger Door Module (PDM). Each row is listed in your worksheet with its address and target value.
How long does Powerfold Mirrors Enable take with FORScan?
Most owners finish Powerfold Mirrors Enable in about 5 minutes once they have the worksheet, a laptop, and a FORScan-compatible OBD-II adapter.
What F-150 years does Powerfold Mirrors Enable work on?
Powerfold Mirrors Enable applies to 2015–2020 F-150 trucks. Compatibility can still vary by trim, package, and module software version, so confirm against your own as-built data.
Anything to watch out for with Powerfold Mirrors Enable?
Requires power fold mirror hardware. Applies to 2015-2020 trucks — mirror addressing was restructured on 2021 and newer, so use the 2021+ version of this mod for those trucks.
Related Mirrors mods
Other FORScan changes in the same category you can add to the same worksheet.
Autofold Mirrors
Mirrors automatically fold when locking vehicle
Autofold Mirrors - Lincoln Style
Lincoln-style mirror autofold behavior
Reverse Tilt Mirrors
Mirrors tilt down when in reverse to see curb
Powerfold Mirrors Enable (2021+)
Enables power folding mirrors (power-fold only, no auto-fold-on-lock)
Autofold Mirrors (2021+)
Mirrors automatically fold when locking vehicle (Ford-style, non-Lincoln)
Autofold Mirrors - Lincoln Style (2021+)
Lincoln-style mirror autofold behavior