Back to all FORScan mods
Lower Risk FORScan Mod

DRL - Include Parking Lights (2021+) FORScan Code for F-150

Your truck

Add DRL - Include Parking Lights (2021+) to a worksheet

$9.99

Choose the year, trim, engine, and drivetrain. Nothing is filled in until you pick it.

Sample

Sample worksheet

Download sample PDF

This is a sample of the layout, not a worksheet for your truck. The paid sheet uses the mods you pick and leaves a blank for each original value. You write any change yourself in FORScan.

Sample rows for a 2021 F-150. These are 2021+ addresses. Auto Start/Stop is not in this sample.

ModuleAddressYour original valueTarget valueNotes
BCM726-39-02____________xxx0 xxxx xx--Sample layout. 2021+ Bambi Mode.
ACM727-01-01____________xxxx xxxx 0x--Sample layout. 2021+ Fake Engine Noise.
BCM726-63-02____________xxx0 xxxx xx--Sample layout. 2021+ Double Horn Honk Disable.

Sample rows only. A purchased worksheet is built from your year, trim, engine, drivetrain, and selected mods. Worksheet purchases are non-refundable except where required by law.

DRL - Include Parking Lights (2021+) is a lower-risk, convenience-oriented change for 2021–2026 Ford F-150 trucks, applied with FORScan over an OBD-II adapter. Adds parking/tail lights to the daytime running light behavior. It is fully reversible and typically takes about 5 minutes to write once your worksheet is in hand.

The change touches the Body Control Module (BCM), and your F-Config worksheet lists all 1 as-built code row with the module, address, and target value. Each row includes a blank for your original value so you can back up before writing changes and roll back later. Turns on rear tails along with the DRLs for a more visible daytime look.

Why F-150 owners use it

Turns on rear tails along with the DRLs for a more visible daytime look

Worksheet rows

1

Modules

1

Estimated time

~5 min

Compatibility

2021-2026

How you'll apply DRL - Include Parking Lights (2021+)

The DIY process from start to finish — backup-first and, where possible, reversible.

1

Back up your originals first

Before changing anything, use FORScan to read and record the current value of each of the 1 row in the Body Control Module (BCM). Your worksheet leaves a blank beside every row for exactly this.

2

Write the worksheet values

Enter the 1 target row from your worksheet one at a time. Most owners finish DRL - Include Parking Lights (2021+) in about 5 minutes with a laptop and a FORScan-compatible OBD-II adapter.

3

Cycle the ignition and verify

Turn the key off and back on, then confirm the change behaves as expected before moving on. If anything looks off, stop and compare against the originals you recorded.

4

Roll back anytime

Because DRL - Include Parking Lights (2021+) is fully reversible, you can put every original value back later and return to stock whenever you want.

Compatible F-150 years

Review year-specific FORScan worksheet context before adding this mod to your build.

Before you write values

Make backups, confirm the adapter can see the truck, and review the FAQ before applying worksheet values.

DRL codes do not add interior ambient lamps. Read the planning guide before you treat a lighting menu as installed hardware. Ambient lighting planning guide

Printable worksheet preview

Customers get a clean worksheet with original-value blanks, target values, completion checks, and module notes.

ModuleAddressTarget valueNotes
BCM726-38-01xxxx xxxx 01--DRL_IncludeParklamps_Cfg enabled

Risk and safety notes

Convenience-oriented worksheet item that still requires backups, review, and customer judgment.

This is a different mechanism than the 2015-2020 "parking lights only" DRL swap — on 2021+ this adds parking lights alongside the existing DRL source rather than replacing it.

Required modules

Body Control Module (BCM)

DRL - Include Parking Lights (2021+) FORScan FAQ

Is DRL - Include Parking Lights (2021+) safe to do on my F-150?

It is rated lower risk on F-Config. It is convenience-oriented, but you should still back up your original as-built values before writing anything.

Is DRL - Include Parking Lights (2021+) reversible?

Yes. This change is fully reversible as long as you record your original as-built values first. Your worksheet leaves a blank for each original value so you can roll back to stock.

Which modules does DRL - Include Parking Lights (2021+) change?

It writes 1 code row to the Body Control Module (BCM). Each row is listed in your worksheet with its address and target value.

How long does DRL - Include Parking Lights (2021+) take with FORScan?

Most owners finish DRL - Include Parking Lights (2021+) in about 5 minutes once they have the worksheet, a laptop, and a FORScan-compatible OBD-II adapter.

What F-150 years does DRL - Include Parking Lights (2021+) work on?

DRL - Include Parking Lights (2021+) applies to 2021–2026 F-150 trucks. Compatibility can still vary by trim, package, and module software version, so confirm against your own as-built data.

Anything to watch out for with DRL - Include Parking Lights (2021+)?

This is a different mechanism than the 2015-2020 "parking lights only" DRL swap — on 2021+ this adds parking lights alongside the existing DRL source rather than replacing it.

Related Lighting mods

Other FORScan changes in the same category you can add to the same worksheet.