Bambi Mode FORScan Code for F-150
Your truck
Add Bambi Mode to a worksheet
$9.99
Choose the year, trim, engine, and drivetrain. Nothing is filled in until you pick it.
Sample
Sample worksheet
This is a sample of the layout, not a worksheet for your truck. The paid sheet uses the mods you pick and leaves a blank for each original value. You write any change yourself in FORScan.
Sample rows for a 2020 F-150. These are 2015-2020 addresses, not the 2021+ map.
| Module | Address | Your original value | Target value | Notes |
|---|---|---|---|---|
| BCM | 726-27-01 | ____________ | xxxx xxx0 xxxx | Sample layout. 2015-2020 Bambi Mode. |
| ACM | 727-01-01 | ____________ | xxxx x0xx xxxx | Sample layout. 2015-2020 Fake Engine Noise. |
| BCM | 726-41-02 | ____________ | xxx0 xxxx xxxx | Sample layout. 2015-2020 Double Horn Honk Disable. |
Sample rows only. A purchased worksheet is built from your year, trim, engine, drivetrain, and selected mods. Worksheet purchases are non-refundable except where required by law.
Bambi Mode is a lower-risk, convenience-oriented change for 2015–2020 Ford F-150 trucks, applied with FORScan over an OBD-II adapter. Enables fog lights and high beams simultaneously. It is fully reversible and typically takes about 5 minutes to write once your worksheet is in hand.
The change touches the Body Control Module (BCM), and your F-Config worksheet lists all 2 as-built code rows with the module, address, and target value. Each row includes a blank for your original value so you can back up before writing changes and roll back later. Maximum lighting for dark country roads, better wildlife visibility.
Why F-150 owners use it
Maximum lighting for dark country roads, better wildlife visibility
Where this fits
Bambi Mode here is the 2015–2020 BCM change that lets the fog lights and high beams run together. A 2021 or newer truck needs Bambi Mode (2021+), which uses a different address. The 2018 F-150 hub is the rest of that generation’s list. The worksheet builder is where you add it to a sheet, the backup guide is the step before a write, and the FAQ covers the paid worksheet.
Worksheet rows
2
Modules
1
Estimated time
~5 min
Compatibility
2015-2020
How you'll apply Bambi Mode
The DIY process from start to finish — backup-first and, where possible, reversible.
Back up your originals first
Before changing anything, use FORScan to read and record the current value of each of the 2 rows in the Body Control Module (BCM). Your worksheet leaves a blank beside every row for exactly this.
Write the worksheet values
Enter the 2 target rows from your worksheet one at a time. Most owners finish Bambi Mode in about 5 minutes with a laptop and a FORScan-compatible OBD-II adapter.
Cycle the ignition and verify
Turn the key off and back on, then confirm the change behaves as expected before moving on. If anything looks off, stop and compare against the originals you recorded.
Roll back anytime
Because Bambi Mode is fully reversible, you can put every original value back later and return to stock whenever you want.
Compatible F-150 years
Review year-specific FORScan worksheet context before adding this mod to your build.
Before you write values
Make backups, confirm the adapter can see the truck, and review the FAQ before applying worksheet values.
DRL codes do not add interior ambient lamps. Read the planning guide before you treat a lighting menu as installed hardware. Ambient lighting planning guide
Printable worksheet preview
Customers get a clean worksheet with original-value blanks, target values, completion checks, and module notes.
| Module | Address | Target value | Notes |
|---|---|---|---|
| BCM | 726-27-01 | xxxx xxx0 xxxx | Without memory after ignition off |
| BCM | 726-27-01 | xxxx xxx0 01xx | With memory after ignition off |
Risk and safety notes
Convenience-oriented worksheet item that still requires backups, review, and customer judgment.
Required modules
Bambi Mode FORScan FAQ
Is Bambi Mode safe to do on my F-150?
It is rated lower risk on F-Config. It is convenience-oriented, but you should still back up your original as-built values before writing anything.
Is Bambi Mode reversible?
Yes. This change is fully reversible as long as you record your original as-built values first. Your worksheet leaves a blank for each original value so you can roll back to stock.
Which modules does Bambi Mode change?
It writes 2 code rows to the Body Control Module (BCM). Each row is listed in your worksheet with its address and target value.
How long does Bambi Mode take with FORScan?
Most owners finish Bambi Mode in about 5 minutes once they have the worksheet, a laptop, and a FORScan-compatible OBD-II adapter.
What F-150 years does Bambi Mode work on?
Bambi Mode applies to 2015–2020 F-150 trucks. Compatibility can still vary by trim, package, and module software version, so confirm against your own as-built data.
Anything to watch out for with Bambi Mode?
Applies to 2015-2020 trucks. The 2021+ platform uses a different address — use the 2021+ version of this mod instead.
Related Lighting mods
Other FORScan changes in the same category you can add to the same worksheet.
DRL - Parking Lights Only
Sets daytime running lights to parking lights only
DRL - Fog Lights Only
Sets daytime running lights to front fog lights
DRL - Position Lamp Config (Super Duty Style)
Position lamps at full brightness like Super Duty
DRL - Turn Signals Only
Sets daytime running lights to turn signals only
DRL - Parking Lights Only (Halogen)
Sets halogen or aftermarket daytime running lights to parking lights only
DRL - Parking Lights & Low Beams
Sets daytime running lights to parking lights and low beams