Bambi Mode (2021+) FORScan Code for F-150
Your truck
Add Bambi Mode (2021+) to a worksheet
$9.99
Choose the year, trim, engine, and drivetrain. Nothing is filled in until you pick it.
Sample
Sample worksheet
This is a sample of the layout, not a worksheet for your truck. The paid sheet uses the mods you pick and leaves a blank for each original value. You write any change yourself in FORScan.
Sample rows for a 2021 F-150. These are 2021+ addresses. Auto Start/Stop is not in this sample.
| Module | Address | Your original value | Target value | Notes |
|---|---|---|---|---|
| BCM | 726-39-02 | ____________ | xxx0 xxxx xx-- | Sample layout. 2021+ Bambi Mode. |
| ACM | 727-01-01 | ____________ | xxxx xxxx 0x-- | Sample layout. 2021+ Fake Engine Noise. |
| BCM | 726-63-02 | ____________ | xxx0 xxxx xx-- | Sample layout. 2021+ Double Horn Honk Disable. |
Sample rows only. A purchased worksheet is built from your year, trim, engine, drivetrain, and selected mods. Worksheet purchases are non-refundable except where required by law.
Bambi Mode (2021+) is a lower-risk, convenience-oriented change for 2021–2026 Ford F-150 trucks, applied with FORScan over an OBD-II adapter. Turns on fog lights automatically whenever the high beams are on. It is fully reversible and typically takes about 5 minutes to write once your worksheet is in hand.
The change touches the Body Control Module (BCM), and your F-Config worksheet lists all 1 as-built code row with the module, address, and target value. Each row includes a blank for your original value so you can back up before writing changes and roll back later. Maximum lighting for dark country roads, better wildlife visibility.
Why F-150 owners use it
Maximum lighting for dark country roads, better wildlife visibility
Where this fits
This 2021–2026 row turns the fog lights on with the high beams. It is not the 2015–2020 address. That page is Bambi Mode. The 2021 F-150 hub lists the other items for the first year of this platform. Use the worksheet builder, the backup guide, and the FAQ before you write the BCM value.
Worksheet rows
1
Modules
1
Estimated time
~5 min
Compatibility
2021-2026
How you'll apply Bambi Mode (2021+)
The DIY process from start to finish — backup-first and, where possible, reversible.
Back up your originals first
Before changing anything, use FORScan to read and record the current value of each of the 1 row in the Body Control Module (BCM). Your worksheet leaves a blank beside every row for exactly this.
Write the worksheet values
Enter the 1 target row from your worksheet one at a time. Most owners finish Bambi Mode (2021+) in about 5 minutes with a laptop and a FORScan-compatible OBD-II adapter.
Cycle the ignition and verify
Turn the key off and back on, then confirm the change behaves as expected before moving on. If anything looks off, stop and compare against the originals you recorded.
Roll back anytime
Because Bambi Mode (2021+) is fully reversible, you can put every original value back later and return to stock whenever you want.
Compatible F-150 years
Review year-specific FORScan worksheet context before adding this mod to your build.
Before you write values
Make backups, confirm the adapter can see the truck, and review the FAQ before applying worksheet values.
DRL codes do not add interior ambient lamps. Read the planning guide before you treat a lighting menu as installed hardware. Ambient lighting planning guide
Printable worksheet preview
Customers get a clean worksheet with original-value blanks, target values, completion checks, and module notes.
| Module | Address | Target value | Notes |
|---|---|---|---|
| BCM | 726-39-02 | xxx0 xxxx xx-- | Included in worksheet |
Risk and safety notes
Convenience-oriented worksheet item that still requires backups, review, and customer judgment.
Required modules
Bambi Mode (2021+) FORScan FAQ
Is Bambi Mode (2021+) safe to do on my F-150?
It is rated lower risk on F-Config. It is convenience-oriented, but you should still back up your original as-built values before writing anything.
Is Bambi Mode (2021+) reversible?
Yes. This change is fully reversible as long as you record your original as-built values first. Your worksheet leaves a blank for each original value so you can roll back to stock.
Which modules does Bambi Mode (2021+) change?
It writes 1 code row to the Body Control Module (BCM). Each row is listed in your worksheet with its address and target value.
How long does Bambi Mode (2021+) take with FORScan?
Most owners finish Bambi Mode (2021+) in about 5 minutes once they have the worksheet, a laptop, and a FORScan-compatible OBD-II adapter.
What F-150 years does Bambi Mode (2021+) work on?
Bambi Mode (2021+) applies to 2021–2026 F-150 trucks. Compatibility can still vary by trim, package, and module software version, so confirm against your own as-built data.
Related Lighting mods
Other FORScan changes in the same category you can add to the same worksheet.
Bambi Mode
Enables fog lights and high beams simultaneously
DRL - Parking Lights Only
Sets daytime running lights to parking lights only
DRL - Fog Lights Only
Sets daytime running lights to front fog lights
DRL - Position Lamp Config (Super Duty Style)
Position lamps at full brightness like Super Duty
DRL - Turn Signals Only
Sets daytime running lights to turn signals only
DRL - Parking Lights Only (Halogen)
Sets halogen or aftermarket daytime running lights to parking lights only