DRL - Parking Lights Only (Halogen) FORScan Code for F-150
Your truck
Add DRL - Parking Lights Only (Halogen) to a worksheet
$9.99
Choose the year, trim, engine, and drivetrain. Nothing is filled in until you pick it.
Sample
Sample worksheet
This is a sample of the layout, not a worksheet for your truck. The paid sheet uses the mods you pick and leaves a blank for each original value. You write any change yourself in FORScan.
Sample rows for a 2020 F-150. These are 2015-2020 addresses, not the 2021+ map.
| Module | Address | Your original value | Target value | Notes |
|---|---|---|---|---|
| BCM | 726-27-01 | ____________ | xxxx xxx0 xxxx | Sample layout. 2015-2020 Bambi Mode. |
| ACM | 727-01-01 | ____________ | xxxx x0xx xxxx | Sample layout. 2015-2020 Fake Engine Noise. |
| BCM | 726-41-02 | ____________ | xxx0 xxxx xxxx | Sample layout. 2015-2020 Double Horn Honk Disable. |
Sample rows only. A purchased worksheet is built from your year, trim, engine, drivetrain, and selected mods. Worksheet purchases are non-refundable except where required by law.
DRL - Parking Lights Only (Halogen) is a lower-risk, convenience-oriented change for 2015–2020 Ford F-150 trucks, applied with FORScan over an OBD-II adapter. Sets halogen or aftermarket daytime running lights to parking lights only. It is fully reversible and typically takes about 5 minutes to write once your worksheet is in hand.
The change touches the Body Control Module (BCM), and your F-Config worksheet lists all 3 as-built code rows with the module, address, and target value. Each row includes a blank for your original value so you can back up before writing changes and roll back later. Clean daytime running light behavior for halogen or aftermarket lighting setups.
Why F-150 owners use it
Clean daytime running light behavior for halogen or aftermarket lighting setups
Worksheet rows
3
Modules
1
Estimated time
~5 min
Compatibility
2015-2020
How you'll apply DRL - Parking Lights Only (Halogen)
The DIY process from start to finish — backup-first and, where possible, reversible.
Back up your originals first
Before changing anything, use FORScan to read and record the current value of each of the 3 rows in the Body Control Module (BCM). Your worksheet leaves a blank beside every row for exactly this.
Write the worksheet values
Enter the 3 target rows from your worksheet one at a time. Most owners finish DRL - Parking Lights Only (Halogen) in about 5 minutes with a laptop and a FORScan-compatible OBD-II adapter.
Cycle the ignition and verify
Turn the key off and back on, then confirm the change behaves as expected before moving on. If anything looks off, stop and compare against the originals you recorded.
Roll back anytime
Because DRL - Parking Lights Only (Halogen) is fully reversible, you can put every original value back later and return to stock whenever you want.
Compatible F-150 years
Review year-specific FORScan worksheet context before adding this mod to your build.
Before you write values
Make backups, confirm the adapter can see the truck, and review the FAQ before applying worksheet values.
DRL codes do not add interior ambient lamps. Read the planning guide before you treat a lighting menu as installed hardware. Ambient lighting planning guide
Printable worksheet preview
Customers get a clean worksheet with original-value blanks, target values, completion checks, and module notes.
| Module | Address | Target value | Notes |
|---|---|---|---|
| BCM | 726-26-02 | x1xx xxxx xxxx | Included in worksheet |
| BCM | 726-45-01 | xxxx 7Fxx xxxx | Included in worksheet |
| BCM | 726-50-01 | 108E | Included in worksheet |
Risk and safety notes
Convenience-oriented worksheet item that still requires backups, review, and customer judgment.
Required modules
DRL - Parking Lights Only (Halogen) FORScan FAQ
Is DRL - Parking Lights Only (Halogen) safe to do on my F-150?
It is rated lower risk on F-Config. It is convenience-oriented, but you should still back up your original as-built values before writing anything.
Is DRL - Parking Lights Only (Halogen) reversible?
Yes. This change is fully reversible as long as you record your original as-built values first. Your worksheet leaves a blank for each original value so you can roll back to stock.
Which modules does DRL - Parking Lights Only (Halogen) change?
It writes 3 code rows to the Body Control Module (BCM). Each row is listed in your worksheet with its address and target value.
How long does DRL - Parking Lights Only (Halogen) take with FORScan?
Most owners finish DRL - Parking Lights Only (Halogen) in about 5 minutes once they have the worksheet, a laptop, and a FORScan-compatible OBD-II adapter.
What F-150 years does DRL - Parking Lights Only (Halogen) work on?
DRL - Parking Lights Only (Halogen) applies to 2015–2020 F-150 trucks. Compatibility can still vary by trim, package, and module software version, so confirm against your own as-built data.
Anything to watch out for with DRL - Parking Lights Only (Halogen)?
Not currently sold. The value we hold for this halogen variant does not match the documented DRL source table, and the stock-LED version of this mod uses a different value. Use the stock LED parking-light DRL worksheet if the truck has stock LED lamps.
Related Lighting mods
Other FORScan changes in the same category you can add to the same worksheet.
Bambi Mode
Enables fog lights and high beams simultaneously
DRL - Parking Lights Only
Sets daytime running lights to parking lights only
DRL - Fog Lights Only
Sets daytime running lights to front fog lights
DRL - Position Lamp Config (Super Duty Style)
Position lamps at full brightness like Super Duty
DRL - Turn Signals Only
Sets daytime running lights to turn signals only
DRL - Parking Lights & Low Beams
Sets daytime running lights to parking lights and low beams