Global Window Open/Close (2021+) FORScan Code for F-150
Your truck
Add Global Window Open/Close (2021+) to a worksheet
$9.99
Choose the year, trim, engine, and drivetrain. Nothing is filled in until you pick it.
Sample
Sample worksheet
This is a sample of the layout, not a worksheet for your truck. The paid sheet uses the mods you pick and leaves a blank for each original value. You write any change yourself in FORScan.
Sample rows for a 2021 F-150. These are 2021+ addresses. Auto Start/Stop is not in this sample.
| Module | Address | Your original value | Target value | Notes |
|---|---|---|---|---|
| BCM | 726-39-02 | ____________ | xxx0 xxxx xx-- | Sample layout. 2021+ Bambi Mode. |
| ACM | 727-01-01 | ____________ | xxxx xxxx 0x-- | Sample layout. 2021+ Fake Engine Noise. |
| BCM | 726-63-02 | ____________ | xxx0 xxxx xx-- | Sample layout. 2021+ Double Horn Honk Disable. |
Sample rows only. A purchased worksheet is built from your year, trim, engine, drivetrain, and selected mods. Worksheet purchases are non-refundable except where required by law.
Global Window Open/Close (2021+) is a lower-risk, convenience-oriented change for 2021–2026 Ford F-150 trucks, applied with FORScan over an OBD-II adapter. Control all windows with key fob. It is fully reversible and typically takes about 5 minutes to write once your worksheet is in hand.
The change touches the Body Control Module (BCM), Driver Door Module (DDM), and Passenger Door Module (PDM), and your F-Config worksheet lists all 13 as-built code rows with the module, address, and target value. Each row includes a blank for your original value so you can back up before writing changes and roll back later. Roll all windows up/down by holding lock/unlock on fob.
Why F-150 owners use it
Roll all windows up/down by holding lock/unlock on fob
Worksheet rows
13
Modules
3
Estimated time
~5 min
Compatibility
2021-2026
How you'll apply Global Window Open/Close (2021+)
The DIY process from start to finish — backup-first and, where possible, reversible.
Back up your originals first
Before changing anything, use FORScan to read and record the current value of each of the 13 rows in the Body Control Module (BCM), Driver Door Module (DDM), and Passenger Door Module (PDM). Your worksheet leaves a blank beside every row for exactly this.
Write the worksheet values
Enter the 13 target rows from your worksheet one at a time. Most owners finish Global Window Open/Close (2021+) in about 5 minutes with a laptop and a FORScan-compatible OBD-II adapter.
Cycle the ignition and verify
Turn the key off and back on, then confirm the change behaves as expected before moving on. If anything looks off, stop and compare against the originals you recorded.
Roll back anytime
Because Global Window Open/Close (2021+) is fully reversible, you can put every original value back later and return to stock whenever you want.
Compatible F-150 years
Review year-specific FORScan worksheet context before adding this mod to your build.
Before you write values
Make backups, confirm the adapter can see the truck, and review the FAQ before applying worksheet values.
Printable worksheet preview
Customers get a clean worksheet with original-value blanks, target values, completion checks, and module notes.
| Module | Address | Target value | Notes |
|---|---|---|---|
| DDM | 740-06-02 | xxxx xxxx 01-- | 2021-2023 |
| PDM | 741-06-02 | xxxx xxxx 01-- | 2021-2023 |
| DDM | 740-06-03 | 01xx xxxx xx-- | 2021-2023 |
| PDM | 741-06-03 | 01xx xxxx xx-- | 2021-2023, to roll down windows: press unlock on fob, then press again and hold |
| BCM | 726-11-02 | xx01 xx01 xx-- | 2021-2023, to roll up windows: press lock on fob, then press again and hold |
| BCM | 726-22-01 | xxxx xxxx 01-- | 2021-2023 |
| BCM | 726-22-02 | xxxx xxxx 01-- | 2021-2023 |
| DDM | 740-06-02 | xxxx xxx1 01-- | 2024-2026: use this nibble position instead |
| PDM | 741-06-02 | xxxx xxx1 01-- | 2024-2026: use this nibble position instead |
| BCM | 726-11-02 | x1xx x1xx xx-- | 2024-2026: to roll down windows, press unlock on fob then press again and hold |
| BCM | 726-22-01 | xxxx xxxx 01-- | 2024-2026, to roll up windows: press lock on fob, then press again and hold |
| BCM | 726-22-02 | xxxx xxxx 01-- | 2024-2026 |
| APIM | 7D0-09-01 | xxxx xExx xx-- | Optional - adds Global Open/Close to Sync 4 Settings menu |
Risk and safety notes
Convenience-oriented worksheet item that still requires backups, review, and customer judgment.
Required modules
Global Window Open/Close (2021+) FORScan FAQ
Is Global Window Open/Close (2021+) safe to do on my F-150?
It is rated lower risk on F-Config. It is convenience-oriented, but you should still back up your original as-built values before writing anything.
Is Global Window Open/Close (2021+) reversible?
Yes. This change is fully reversible as long as you record your original as-built values first. Your worksheet leaves a blank for each original value so you can roll back to stock.
Which modules does Global Window Open/Close (2021+) change?
It writes 13 code rows to the Body Control Module (BCM), Driver Door Module (DDM), and Passenger Door Module (PDM). Each row is listed in your worksheet with its address and target value.
How long does Global Window Open/Close (2021+) take with FORScan?
Most owners finish Global Window Open/Close (2021+) in about 5 minutes once they have the worksheet, a laptop, and a FORScan-compatible OBD-II adapter.
What F-150 years does Global Window Open/Close (2021+) work on?
Global Window Open/Close (2021+) applies to 2021–2026 F-150 trucks. Compatibility can still vary by trim, package, and module software version, so confirm against your own as-built data.
Anything to watch out for with Global Window Open/Close (2021+)?
Fully different addresses from the 2015-2020 version; BCM 726-30-01 is now a Global Open persona toggle, not this feature. Nibble positions differ between the 2021-2023 and 2024-2026 sub-generations for several of these addresses — use the matching set for the truck’s model year.
Related Windows & Locks mods
Other FORScan changes in the same category you can add to the same worksheet.
Global Window Open/Close
Control all windows with key fob
Double Horn Honk Disable
Disables the double honk when locking
Auto Relock Enable
Truck automatically relocks if not opened after unlocking
Panic Alarm Disable
Disables or modifies panic alarm on key fob
Canadian Forced DRL Cluster Control
Changes Canadian forced DRLs to cluster-controlled DRLs
Panic Alarm - Lights & Horn
Sets panic alarm behavior to lights and horn