Loading...
Loading...
Global Window Open/Close is a lower-risk, convenience-oriented change for 2015–2026 Ford F-150 trucks, applied with FORScan over an OBD-II adapter. Control all windows with key fob. It is fully reversible and typically takes about 5 minutes to write once your worksheet is in hand.
The change touches the Body Control Module (BCM), Driver Door Module (DDM), and Passenger Door Module (PDM), and your F-Config worksheet lists all 5 as-built code rows with the module, address, and target value. Each row includes a blank for your original value so you can back up before writing changes and roll back later. Roll all windows up/down by holding lock/unlock on fob.
Roll all windows up/down by holding lock/unlock on fob
Worksheet rows
5
Modules
3
Estimated time
~5 min
Compatibility
2015-2026
The DIY process from start to finish — backup-first and, where possible, reversible.
Before changing anything, use FORScan to read and record the current value of each of the 5 rows in the Body Control Module (BCM), Driver Door Module (DDM), and Passenger Door Module (PDM). Your worksheet leaves a blank beside every row for exactly this.
Enter the 5 target rows from your worksheet one at a time. Most owners finish Global Window Open/Close in about 5 minutes with a laptop and a FORScan-compatible OBD-II adapter.
Turn the key off and back on, then confirm the change behaves as expected before moving on. If anything looks off, stop and compare against the originals you recorded.
Because Global Window Open/Close is fully reversible, you can put every original value back later and return to stock whenever you want.
Review year-specific FORScan worksheet context before adding this mod to your build.
Make backups, understand the tool requirements, and review the FAQ before applying worksheet values.
Customers get a clean worksheet with original-value blanks, target values, completion checks, and module notes.
| Module | Address | Target value | Notes |
|---|---|---|---|
| BCM | 726-17-01 | 0101 0101 014A | Included in worksheet |
| BCM | 726-17-02 | 0101 0101 014B | Included in worksheet |
| BCM | 726-30-01 | 0101 xxxx xxxx | Included in worksheet |
| DDM | 740-05-01 | Dxxx xx | Included in worksheet |
| PDM | 741-05-01 | Dxxx xx | Included in worksheet |
Convenience-oriented worksheet item that still requires backups, review, and customer judgment.
It is rated lower risk on F-Config. It is convenience-oriented, but you should still back up your original as-built values before writing anything.
Yes. This change is fully reversible as long as you record your original as-built values first. Your worksheet leaves a blank for each original value so you can roll back to stock.
It writes 5 code rows to the Body Control Module (BCM), Driver Door Module (DDM), and Passenger Door Module (PDM). Each row is listed in your worksheet with its address and target value.
Most owners finish Global Window Open/Close in about 5 minutes once they have the worksheet, a laptop, and a FORScan-compatible OBD-II adapter.
Global Window Open/Close applies to 2015–2026 F-150 trucks. Compatibility can still vary by trim, package, and module software version, so confirm against your own as-built data.
Other FORScan changes in the same category you can add to the same worksheet.
Disables the double honk when locking
Truck automatically relocks if not opened after unlocking
Disables or modifies panic alarm on key fob
Changes Canadian forced DRLs to cluster-controlled DRLs
Sets panic alarm behavior to lights and horn
Shows auto lock control in cluster settings where absent