Auto Lock Menu in Sync Settings (2021+) FORScan Code for F-150
Your truck
Add Auto Lock Menu in Sync Settings (2021+) to a worksheet
$9.99
Choose the year, trim, engine, and drivetrain. Nothing is filled in until you pick it.
Sample
Sample worksheet
This is a sample of the layout, not a worksheet for your truck. The paid sheet uses the mods you pick and leaves a blank for each original value. You write any change yourself in FORScan.
Sample rows for a 2021 F-150. These are 2021+ addresses. Auto Start/Stop is not in this sample.
| Module | Address | Your original value | Target value | Notes |
|---|---|---|---|---|
| BCM | 726-39-02 | ____________ | xxx0 xxxx xx-- | Sample layout. 2021+ Bambi Mode. |
| ACM | 727-01-01 | ____________ | xxxx xxxx 0x-- | Sample layout. 2021+ Fake Engine Noise. |
| BCM | 726-63-02 | ____________ | xxx0 xxxx xx-- | Sample layout. 2021+ Double Horn Honk Disable. |
Sample rows only. A purchased worksheet is built from your year, trim, engine, drivetrain, and selected mods. Worksheet purchases are non-refundable except where required by law.
Auto Lock Menu in Sync Settings (2021+) is a lower-risk, convenience-oriented change for 2021–2026 Ford F-150 trucks, applied with FORScan over an OBD-II adapter. Adds the auto-lock control to the Sync settings menu. It is fully reversible and typically takes about 5 minutes to write once your worksheet is in hand.
The change touches the Accessory Protocol Interface Module (SYNC) (APIM), and your F-Config worksheet lists all 2 as-built code rows with the module, address, and target value. Each row includes a blank for your original value so you can back up before writing changes and roll back later. Turn auto-lock on and off yourself instead of needing FORScan each time.
Why F-150 owners use it
Turn auto-lock on and off yourself instead of needing FORScan each time
Worksheet rows
2
Modules
1
Estimated time
~5 min
Compatibility
2021-2026
How you'll apply Auto Lock Menu in Sync Settings (2021+)
The DIY process from start to finish — backup-first and, where possible, reversible.
Back up your originals first
Before changing anything, use FORScan to read and record the current value of each of the 2 rows in the Accessory Protocol Interface Module (SYNC) (APIM). Your worksheet leaves a blank beside every row for exactly this.
Write the worksheet values
Enter the 2 target rows from your worksheet one at a time. Most owners finish Auto Lock Menu in Sync Settings (2021+) in about 5 minutes with a laptop and a FORScan-compatible OBD-II adapter.
Cycle the ignition and verify
Turn the key off and back on, then confirm the change behaves as expected before moving on. If anything looks off, stop and compare against the originals you recorded.
Roll back anytime
Because Auto Lock Menu in Sync Settings (2021+) is fully reversible, you can put every original value back later and return to stock whenever you want.
Compatible F-150 years
Review year-specific FORScan worksheet context before adding this mod to your build.
Before you write values
Make backups, confirm the adapter can see the truck, and review the FAQ before applying worksheet values.
Printable worksheet preview
Customers get a clean worksheet with original-value blanks, target values, completion checks, and module notes.
| Module | Address | Target value | Notes |
|---|---|---|---|
| APIM | 7D0-09-01 | xx8x xxxx xx-- | Auto lock menu on |
| APIM | 7D0-09-01 | xxBx xxxx xx-- | Use this instead if you also want the Auto Relock menu (auto lock + auto relock + auto unlock) |
Risk and safety notes
Convenience-oriented worksheet item that still requires backups, review, and customer judgment.
Required modules
Auto Lock Menu in Sync Settings (2021+) FORScan FAQ
Is Auto Lock Menu in Sync Settings (2021+) safe to do on my F-150?
It is rated lower risk on F-Config. It is convenience-oriented, but you should still back up your original as-built values before writing anything.
Is Auto Lock Menu in Sync Settings (2021+) reversible?
Yes. This change is fully reversible as long as you record your original as-built values first. Your worksheet leaves a blank for each original value so you can roll back to stock.
Which modules does Auto Lock Menu in Sync Settings (2021+) change?
It writes 2 code rows to the Accessory Protocol Interface Module (SYNC) (APIM). Each row is listed in your worksheet with its address and target value.
How long does Auto Lock Menu in Sync Settings (2021+) take with FORScan?
Most owners finish Auto Lock Menu in Sync Settings (2021+) in about 5 minutes once they have the worksheet, a laptop, and a FORScan-compatible OBD-II adapter.
What F-150 years does Auto Lock Menu in Sync Settings (2021+) work on?
Auto Lock Menu in Sync Settings (2021+) applies to 2021–2026 F-150 trucks. Compatibility can still vary by trim, package, and module software version, so confirm against your own as-built data.
Anything to watch out for with Auto Lock Menu in Sync Settings (2021+)?
On 2021+ trucks this control lives in Sync settings rather than the instrument cluster, so it is a different module and address than the 2015-2020 version. This one value also covers auto relock and auto unlock — if you are also applying the 2021+ Auto Relock mod, use the combined value rather than both instructions. Record the original value before writing.
Related Windows & Locks mods
Other FORScan changes in the same category you can add to the same worksheet.
Global Window Open/Close
Control all windows with key fob
Double Horn Honk Disable
Disables the double honk when locking
Auto Relock Enable
Truck automatically relocks if not opened after unlocking
Panic Alarm Disable
Disables or modifies panic alarm on key fob
Canadian Forced DRL Cluster Control
Changes Canadian forced DRLs to cluster-controlled DRLs
Panic Alarm - Lights & Horn
Sets panic alarm behavior to lights and horn