Back to all FORScan mods
Lower Risk FORScan Mod

Powerpoint Timeout Disable (2021+) FORScan Code for F-150

Your truck

Add Powerpoint Timeout Disable (2021+) to a worksheet

$9.99

Choose the year, trim, engine, and drivetrain. Nothing is filled in until you pick it.

Sample

Sample worksheet

Download sample PDF

This is a sample of the layout, not a worksheet for your truck. The paid sheet uses the mods you pick and leaves a blank for each original value. You write any change yourself in FORScan.

Sample rows for a 2021 F-150. These are 2021+ addresses. Auto Start/Stop is not in this sample.

ModuleAddressYour original valueTarget valueNotes
BCM726-39-02____________xxx0 xxxx xx--Sample layout. 2021+ Bambi Mode.
ACM727-01-01____________xxxx xxxx 0x--Sample layout. 2021+ Fake Engine Noise.
BCM726-63-02____________xxx0 xxxx xx--Sample layout. 2021+ Double Horn Honk Disable.

Sample rows only. A purchased worksheet is built from your year, trim, engine, drivetrain, and selected mods. Worksheet purchases are non-refundable except where required by law.

Powerpoint Timeout Disable (2021+) is a lower-risk, convenience-oriented change for 2021–2026 Ford F-150 trucks, applied with FORScan over an OBD-II adapter. Disables the power outlet (12V) timeout so it stays on. It is fully reversible and typically takes about 5 minutes to write once your worksheet is in hand.

The change touches the Body Control Module (BCM), and your F-Config worksheet lists all 3 as-built code rows with the module, address, and target value. Each row includes a blank for your original value so you can back up before writing changes and roll back later. Keep charging devices without engine running.

Why F-150 owners use it

Keep charging devices without engine running

Worksheet rows

3

Modules

1

Estimated time

~5 min

Compatibility

2021-2026

How you'll apply Powerpoint Timeout Disable (2021+)

The DIY process from start to finish — backup-first and, where possible, reversible.

1

Back up your originals first

Before changing anything, use FORScan to read and record the current value of each of the 3 rows in the Body Control Module (BCM). Your worksheet leaves a blank beside every row for exactly this.

2

Write the worksheet values

Enter the 3 target rows from your worksheet one at a time. Most owners finish Powerpoint Timeout Disable (2021+) in about 5 minutes with a laptop and a FORScan-compatible OBD-II adapter.

3

Cycle the ignition and verify

Turn the key off and back on, then confirm the change behaves as expected before moving on. If anything looks off, stop and compare against the originals you recorded.

4

Roll back anytime

Because Powerpoint Timeout Disable (2021+) is fully reversible, you can put every original value back later and return to stock whenever you want.

Compatible F-150 years

Review year-specific FORScan worksheet context before adding this mod to your build.

Before you write values

Make backups, confirm the adapter can see the truck, and review the FAQ before applying worksheet values.

Printable worksheet preview

Customers get a clean worksheet with original-value blanks, target values, completion checks, and module notes.

ModuleAddressTarget valueNotes
BCM726-57-01xxxx 00xx xx--Timeout disabled (always on)
BCM726-57-01xxxx 01xx xx--Timeout enabled (factory default) - uses the duration value below
BCM726-57-01ABCD xxxx xx--Optional: timeout duration in seconds, hex-encoded (e.g. 0001 = 1 second). Only used when timeout is enabled above.

Risk and safety notes

Convenience-oriented worksheet item that still requires backups, review, and customer judgment.

Required modules

Body Control Module (BCM)

Powerpoint Timeout Disable (2021+) FORScan FAQ

Is Powerpoint Timeout Disable (2021+) safe to do on my F-150?

It is rated lower risk on F-Config. It is convenience-oriented, but you should still back up your original as-built values before writing anything.

Is Powerpoint Timeout Disable (2021+) reversible?

Yes. This change is fully reversible as long as you record your original as-built values first. Your worksheet leaves a blank for each original value so you can roll back to stock.

Which modules does Powerpoint Timeout Disable (2021+) change?

It writes 3 code rows to the Body Control Module (BCM). Each row is listed in your worksheet with its address and target value.

How long does Powerpoint Timeout Disable (2021+) take with FORScan?

Most owners finish Powerpoint Timeout Disable (2021+) in about 5 minutes once they have the worksheet, a laptop, and a FORScan-compatible OBD-II adapter.

What F-150 years does Powerpoint Timeout Disable (2021+) work on?

Powerpoint Timeout Disable (2021+) applies to 2021–2026 F-150 trucks. Compatibility can still vary by trim, package, and module software version, so confirm against your own as-built data.

Related SYNC & Media mods

Other FORScan changes in the same category you can add to the same worksheet.