Video On Demand / Video in Motion (2021+) FORScan Code for F-150
Your truck
Add Video On Demand / Video in Motion (2021+) to a worksheet
$9.99
Choose the year, trim, engine, and drivetrain. Nothing is filled in until you pick it.
Sample
Sample worksheet
This is a sample of the layout, not a worksheet for your truck. The paid sheet uses the mods you pick and leaves a blank for each original value. You write any change yourself in FORScan.
Sample rows for a 2021 F-150. These are 2021+ addresses. Auto Start/Stop is not in this sample.
| Module | Address | Your original value | Target value | Notes |
|---|---|---|---|---|
| BCM | 726-39-02 | ____________ | xxx0 xxxx xx-- | Sample layout. 2021+ Bambi Mode. |
| ACM | 727-01-01 | ____________ | xxxx xxxx 0x-- | Sample layout. 2021+ Fake Engine Noise. |
| BCM | 726-63-02 | ____________ | xxx0 xxxx xx-- | Sample layout. 2021+ Double Horn Honk Disable. |
Sample rows only. A purchased worksheet is built from your year, trim, engine, drivetrain, and selected mods. Worksheet purchases are non-refundable except where required by law.
Video On Demand / Video in Motion (2021+) is an advanced change that rewards careful backups for 2021–2026 Ford F-150 trucks, applied with FORScan over an OBD-II adapter. Allows video playback while the vehicle is moving. It is fully reversible and typically takes about 10 minutes to write once your worksheet is in hand.
The change touches the Accessory Protocol Interface Module (SYNC) (APIM), and your F-Config worksheet lists all 1 as-built code row with the module, address, and target value. Each row includes a blank for your original value so you can back up before writing changes and roll back later. Passenger can watch video on Sync 4/4A while driving.
Why F-150 owners use it
Passenger can watch video on Sync 4/4A while driving
Worksheet rows
1
Modules
1
Estimated time
~10 min
Compatibility
2021-2026
How you'll apply Video On Demand / Video in Motion (2021+)
The DIY process from start to finish — backup-first and, where possible, reversible.
Back up your originals first
Before changing anything, use FORScan to read and record the current value of each of the 1 row in the Accessory Protocol Interface Module (SYNC) (APIM). Your worksheet leaves a blank beside every row for exactly this.
Write the worksheet values
Enter the 1 target row from your worksheet one at a time. Most owners finish Video On Demand / Video in Motion (2021+) in about 10 minutes with a laptop and a FORScan-compatible OBD-II adapter.
Cycle the ignition and verify
Turn the key off and back on, then confirm the change behaves as expected before moving on. If anything looks off, stop and compare against the originals you recorded.
Roll back anytime
Because Video On Demand / Video in Motion (2021+) is fully reversible, you can put every original value back later and return to stock whenever you want.
Compatible F-150 years
Review year-specific FORScan worksheet context before adding this mod to your build.
Before you write values
Make backups, confirm the adapter can see the truck, and review the FAQ before applying worksheet values.
Printable worksheet preview
Customers get a clean worksheet with original-value blanks, target values, completion checks, and module notes.
| Module | Address | Target value | Notes |
|---|---|---|---|
| APIM | 7D0-01-03 | xx2x xxxx xxxx | Video On Demand (VOD) enabled. Add 2 (hex) to the current nibble value to enable while preserving the other packed bits (Driver Assist Hot Key / Auto Hold / Driver Only MCS) — e.g. if default is 0, use 2; if Auto Hold is also on (4), use 6. |
Risk and safety notes
Requires careful backups and confidence working in FORScan.
Required modules
Video On Demand / Video in Motion (2021+) FORScan FAQ
Is Video On Demand / Video in Motion (2021+) safe to do on my F-150?
It is rated advanced. It is well within reach for a careful DIYer, but back up your original values and work through the worksheet one row at a time.
Is Video On Demand / Video in Motion (2021+) reversible?
Yes. This change is fully reversible as long as you record your original as-built values first. Your worksheet leaves a blank for each original value so you can roll back to stock.
Which modules does Video On Demand / Video in Motion (2021+) change?
It writes 1 code row to the Accessory Protocol Interface Module (SYNC) (APIM). Each row is listed in your worksheet with its address and target value.
How long does Video On Demand / Video in Motion (2021+) take with FORScan?
Most owners finish Video On Demand / Video in Motion (2021+) in about 10 minutes once they have the worksheet, a laptop, and a FORScan-compatible OBD-II adapter.
What F-150 years does Video On Demand / Video in Motion (2021+) work on?
Video On Demand / Video in Motion (2021+) applies to 2021–2026 F-150 trucks. Compatibility can still vary by trim, package, and module software version, so confirm against your own as-built data.
Anything to watch out for with Video On Demand / Video in Motion (2021+)?
Sync 4/4A renamed this feature "Video On Demand" and moved it to a different APIM address/byte than the 2015-2020 Sync 2/3 "NAV/Video in Motion" field. Confirm local distracted-driving laws before enabling.
Related SYNC & Media mods
Other FORScan changes in the same category you can add to the same worksheet.
NAV/Video in Motion
Allows navigation and text reading while vehicle is moving
Heated/Cooled Seat Icons on Screen
Shows heated/cooled seat controls on home and climate screen
Heated Steering Wheel Icon on Screen
Shows heated steering wheel control on home and climate screen
Stereo Extended Play
Allows stereo to keep playing after turning off engine
Powerpoint Timeout Disable
Disables power outlet timeout
Stereo Without Accessory Mode (2015)
Allows stereo use without accessory mode on 2015 F-150s