Back to all FORScan mods
Lower Risk FORScan Mod

DRL - Parking Lights & Turn Signals FORScan Code for F-150

Your truck

Add DRL - Parking Lights & Turn Signals to a worksheet

$9.99

Choose the year, trim, engine, and drivetrain. Nothing is filled in until you pick it.

Sample

Sample worksheet

Download sample PDF

This is a sample of the layout, not a worksheet for your truck. The paid sheet uses the mods you pick and leaves a blank for each original value. You write any change yourself in FORScan.

Sample rows for a 2020 F-150. These are 2015-2020 addresses, not the 2021+ map.

ModuleAddressYour original valueTarget valueNotes
BCM726-27-01____________xxxx xxx0 xxxxSample layout. 2015-2020 Bambi Mode.
ACM727-01-01____________xxxx x0xx xxxxSample layout. 2015-2020 Fake Engine Noise.
BCM726-41-02____________xxx0 xxxx xxxxSample layout. 2015-2020 Double Horn Honk Disable.

Sample rows only. A purchased worksheet is built from your year, trim, engine, drivetrain, and selected mods. Worksheet purchases are non-refundable except where required by law.

DRL - Parking Lights & Turn Signals is a lower-risk, convenience-oriented change for 2015–2020 Ford F-150 trucks, applied with FORScan over an OBD-II adapter. Sets daytime running lights to parking lights and turn signals. It is fully reversible and typically takes about 5 minutes to write once your worksheet is in hand.

The change touches the Body Control Module (BCM), and your F-Config worksheet lists all 3 as-built code rows with the module, address, and target value. Each row includes a blank for your original value so you can back up before writing changes and roll back later. Unique daytime running light look with parking lamps and turn signals.

Why F-150 owners use it

Unique daytime running light look with parking lamps and turn signals

Worksheet rows

3

Modules

1

Estimated time

~5 min

Compatibility

2015-2020

How you'll apply DRL - Parking Lights & Turn Signals

The DIY process from start to finish — backup-first and, where possible, reversible.

1

Back up your originals first

Before changing anything, use FORScan to read and record the current value of each of the 3 rows in the Body Control Module (BCM). Your worksheet leaves a blank beside every row for exactly this.

2

Write the worksheet values

Enter the 3 target rows from your worksheet one at a time. Most owners finish DRL - Parking Lights & Turn Signals in about 5 minutes with a laptop and a FORScan-compatible OBD-II adapter.

3

Cycle the ignition and verify

Turn the key off and back on, then confirm the change behaves as expected before moving on. If anything looks off, stop and compare against the originals you recorded.

4

Roll back anytime

Because DRL - Parking Lights & Turn Signals is fully reversible, you can put every original value back later and return to stock whenever you want.

Compatible F-150 years

Review year-specific FORScan worksheet context before adding this mod to your build.

Before you write values

Make backups, confirm the adapter can see the truck, and review the FAQ before applying worksheet values.

DRL codes do not add interior ambient lamps. Read the planning guide before you treat a lighting menu as installed hardware. Ambient lighting planning guide

Printable worksheet preview

Customers get a clean worksheet with original-value blanks, target values, completion checks, and module notes.

ModuleAddressTarget valueNotes
BCM726-45-01xxxx 7Fxx xxxxIncluded in worksheet
BCM726-26-02x1xx xxxx xxxxIncluded in worksheet
BCM726-50-0108xxIncluded in worksheet

Risk and safety notes

Convenience-oriented worksheet item that still requires backups, review, and customer judgment.

Required modules

Body Control Module (BCM)

DRL - Parking Lights & Turn Signals FORScan FAQ

Is DRL - Parking Lights & Turn Signals safe to do on my F-150?

It is rated lower risk on F-Config. It is convenience-oriented, but you should still back up your original as-built values before writing anything.

Is DRL - Parking Lights & Turn Signals reversible?

Yes. This change is fully reversible as long as you record your original as-built values first. Your worksheet leaves a blank for each original value so you can roll back to stock.

Which modules does DRL - Parking Lights & Turn Signals change?

It writes 3 code rows to the Body Control Module (BCM). Each row is listed in your worksheet with its address and target value.

How long does DRL - Parking Lights & Turn Signals take with FORScan?

Most owners finish DRL - Parking Lights & Turn Signals in about 5 minutes once they have the worksheet, a laptop, and a FORScan-compatible OBD-II adapter.

What F-150 years does DRL - Parking Lights & Turn Signals work on?

DRL - Parking Lights & Turn Signals applies to 2015–2020 F-150 trucks. Compatibility can still vary by trim, package, and module software version, so confirm against your own as-built data.

Related Lighting mods

Other FORScan changes in the same category you can add to the same worksheet.