DRL - High Beams Only FORScan Code for F-150
Your truck
Add DRL - High Beams Only to a worksheet
$9.99
Choose the year, trim, engine, and drivetrain. Nothing is filled in until you pick it.
Sample
Sample worksheet
This is a sample of the layout, not a worksheet for your truck. The paid sheet uses the mods you pick and leaves a blank for each original value. You write any change yourself in FORScan.
Sample rows for a 2020 F-150. These are 2015-2020 addresses, not the 2021+ map.
| Module | Address | Your original value | Target value | Notes |
|---|---|---|---|---|
| BCM | 726-27-01 | ____________ | xxxx xxx0 xxxx | Sample layout. 2015-2020 Bambi Mode. |
| ACM | 727-01-01 | ____________ | xxxx x0xx xxxx | Sample layout. 2015-2020 Fake Engine Noise. |
| BCM | 726-41-02 | ____________ | xxx0 xxxx xxxx | Sample layout. 2015-2020 Double Horn Honk Disable. |
Sample rows only. A purchased worksheet is built from your year, trim, engine, drivetrain, and selected mods. Worksheet purchases are non-refundable except where required by law.
DRL - High Beams Only is an advanced change that rewards careful backups for 2015–2020 Ford F-150 trucks, applied with FORScan over an OBD-II adapter. Sets daytime running lights to high beams only. It is fully reversible and typically takes about 10 minutes to write once your worksheet is in hand.
The change touches the Body Control Module (BCM), and your F-Config worksheet lists all 2 as-built code rows with the module, address, and target value. Each row includes a blank for your original value so you can back up before writing changes and roll back later. High-beam daytime running light configuration from the 2015-2020 spreadsheet.
Why F-150 owners use it
High-beam daytime running light configuration from the 2015-2020 spreadsheet
Worksheet rows
2
Modules
1
Estimated time
~10 min
Compatibility
2015-2020
How you'll apply DRL - High Beams Only
The DIY process from start to finish — backup-first and, where possible, reversible.
Back up your originals first
Before changing anything, use FORScan to read and record the current value of each of the 2 rows in the Body Control Module (BCM). Your worksheet leaves a blank beside every row for exactly this.
Write the worksheet values
Enter the 2 target rows from your worksheet one at a time. Most owners finish DRL - High Beams Only in about 10 minutes with a laptop and a FORScan-compatible OBD-II adapter.
Cycle the ignition and verify
Turn the key off and back on, then confirm the change behaves as expected before moving on. If anything looks off, stop and compare against the originals you recorded.
Roll back anytime
Because DRL - High Beams Only is fully reversible, you can put every original value back later and return to stock whenever you want.
Compatible F-150 years
Review year-specific FORScan worksheet context before adding this mod to your build.
Before you write values
Make backups, confirm the adapter can see the truck, and review the FAQ before applying worksheet values.
DRL codes do not add interior ambient lamps. Read the planning guide before you treat a lighting menu as installed hardware. Ambient lighting planning guide
Printable worksheet preview
Customers get a clean worksheet with original-value blanks, target values, completion checks, and module notes.
| Module | Address | Target value | Notes |
|---|---|---|---|
| BCM | 726-45-01 | xxxx 7Fxx xxxx | Included in worksheet |
| BCM | 726-50-01 | 20xx | 20 = DRL High Beams |
Risk and safety notes
Requires careful backups and confidence working in FORScan.
Required modules
DRL - High Beams Only FORScan FAQ
Is DRL - High Beams Only safe to do on my F-150?
It is rated advanced. It is well within reach for a careful DIYer, but back up your original values and work through the worksheet one row at a time.
Is DRL - High Beams Only reversible?
Yes. This change is fully reversible as long as you record your original as-built values first. Your worksheet leaves a blank for each original value so you can roll back to stock.
Which modules does DRL - High Beams Only change?
It writes 2 code rows to the Body Control Module (BCM). Each row is listed in your worksheet with its address and target value.
How long does DRL - High Beams Only take with FORScan?
Most owners finish DRL - High Beams Only in about 10 minutes once they have the worksheet, a laptop, and a FORScan-compatible OBD-II adapter.
What F-150 years does DRL - High Beams Only work on?
DRL - High Beams Only applies to 2015–2020 F-150 trucks. Compatibility can still vary by trim, package, and module software version, so confirm against your own as-built data.
Anything to watch out for with DRL - High Beams Only?
High-beam DRLs are bright and are not legal for road use everywhere. Verify local lighting rules before using this, and record the original value first.
Related Lighting mods
Other FORScan changes in the same category you can add to the same worksheet.
Bambi Mode
Enables fog lights and high beams simultaneously
DRL - Parking Lights Only
Sets daytime running lights to parking lights only
DRL - Fog Lights Only
Sets daytime running lights to front fog lights
DRL - Position Lamp Config (Super Duty Style)
Position lamps at full brightness like Super Duty
DRL - Turn Signals Only
Sets daytime running lights to turn signals only
DRL - Parking Lights Only (Halogen)
Sets halogen or aftermarket daytime running lights to parking lights only