Trail Control FORScan Code for F-150
Your truck
Add Trail Control to a worksheet
$9.99
Choose the year, trim, engine, and drivetrain. Nothing is filled in until you pick it.
Sample
Sample worksheet
This is a sample of the layout, not a worksheet for your truck. The paid sheet uses the mods you pick and leaves a blank for each original value. You write any change yourself in FORScan.
Sample rows for a 2025 F-150. These are 2021+ addresses. Auto Start/Stop is not in this sample.
| Module | Address | Your original value | Target value | Notes |
|---|---|---|---|---|
| BCM | 726-39-02 | ____________ | xxx0 xxxx xx-- | Sample layout. 2021+ Bambi Mode. |
| ACM | 727-01-01 | ____________ | xxxx xxxx 0x-- | Sample layout. 2021+ Fake Engine Noise. |
| BCM | 726-63-02 | ____________ | xxx0 xxxx xx-- | Sample layout. 2021+ Double Horn Honk Disable. |
Sample rows only. A purchased worksheet is built from your year, trim, engine, drivetrain, and selected mods. Worksheet purchases are non-refundable except where required by law.
Trail Control is an advanced change that rewards careful backups for 2025–2026 Ford F-150 trucks, applied with FORScan over an OBD-II adapter. Enables Trail Control (low-speed off-road cruise control). It is fully reversible and typically takes about 10 minutes to write once your worksheet is in hand.
The change touches the Anti-Lock Brake System (ABS), and your F-Config worksheet lists all 2 as-built code rows with the module, address, and target value. Each row includes a blank for your original value so you can back up before writing changes and roll back later. Low-speed off-road cruise control, and enables Trail Turn Assist for a tighter turning radius.
Why F-150 owners use it
Low-speed off-road cruise control, and enables Trail Turn Assist for a tighter turning radius
Worksheet rows
2
Modules
1
Estimated time
~10 min
Compatibility
2025-2026
How you'll apply Trail Control
The DIY process from start to finish — backup-first and, where possible, reversible.
Back up your originals first
Before changing anything, use FORScan to read and record the current value of each of the 2 rows in the Anti-Lock Brake System (ABS). Your worksheet leaves a blank beside every row for exactly this.
Write the worksheet values
Enter the 2 target rows from your worksheet one at a time. Most owners finish Trail Control in about 10 minutes with a laptop and a FORScan-compatible OBD-II adapter.
Cycle the ignition and verify
Turn the key off and back on, then confirm the change behaves as expected before moving on. If anything looks off, stop and compare against the originals you recorded.
Roll back anytime
Because Trail Control is fully reversible, you can put every original value back later and return to stock whenever you want.
Compatible F-150 years
Review year-specific FORScan worksheet context before adding this mod to your build.
Before you write values
Make backups, confirm the adapter can see the truck, and review the FAQ before applying worksheet values.
Printable worksheet preview
Customers get a clean worksheet with original-value blanks, target values, completion checks, and module notes.
| Module | Address | Target value | Notes |
|---|---|---|---|
| ABS | 760-03-01 | xx0x xxxx xx-- | 0=Trail Control off |
| ABS | 760-03-01 | xx4x xxxx xx-- | 4=Trail Control (with Trail Turn Assist) |
Risk and safety notes
Requires careful backups and confidence working in FORScan.
Required modules
Trail Control FORScan FAQ
Is Trail Control safe to do on my F-150?
It is rated advanced. It is well within reach for a careful DIYer, but back up your original values and work through the worksheet one row at a time.
Is Trail Control reversible?
Yes. This change is fully reversible as long as you record your original as-built values first. Your worksheet leaves a blank for each original value so you can roll back to stock.
Which modules does Trail Control change?
It writes 2 code rows to the Anti-Lock Brake System (ABS). Each row is listed in your worksheet with its address and target value.
How long does Trail Control take with FORScan?
Most owners finish Trail Control in about 10 minutes once they have the worksheet, a laptop, and a FORScan-compatible OBD-II adapter.
What F-150 years does Trail Control work on?
Trail Control applies to 2025–2026 F-150 trucks. Compatibility can still vary by trim, package, and module software version, so confirm against your own as-built data.
Anything to watch out for with Trail Control?
Available on 2025-2026 Raptor and Tremor only. Trail Control is not exposed as a separate setting on 2021-2024 trucks — that address carries other driver-assist features on those model years. This single setting also enables Trail Turn Assist, which brakes the inner rear wheel for a tighter turning radius; there is no separate Trail Turn Assist code. Requires compatible hardware and may require additional module programming.