Back to all FORScan mods
Lower Risk FORScan Mod

Powerpoint Timeout - 1 Second FORScan Code for F-150

Your truck

Add Powerpoint Timeout - 1 Second to a worksheet

$9.99

Choose the year, trim, engine, and drivetrain. Nothing is filled in until you pick it.

Sample

Sample worksheet

Download sample PDF

This is a sample of the layout, not a worksheet for your truck. The paid sheet uses the mods you pick and leaves a blank for each original value. You write any change yourself in FORScan.

Sample rows for a 2020 F-150. These are 2015-2020 addresses, not the 2021+ map.

ModuleAddressYour original valueTarget valueNotes
BCM726-27-01____________xxxx xxx0 xxxxSample layout. 2015-2020 Bambi Mode.
ACM727-01-01____________xxxx x0xx xxxxSample layout. 2015-2020 Fake Engine Noise.
BCM726-41-02____________xxx0 xxxx xxxxSample layout. 2015-2020 Double Horn Honk Disable.

Sample rows only. A purchased worksheet is built from your year, trim, engine, drivetrain, and selected mods. Worksheet purchases are non-refundable except where required by law.

Powerpoint Timeout - 1 Second is a lower-risk, convenience-oriented change for 2015–2020 Ford F-150 trucks, applied with FORScan over an OBD-II adapter. Enables powerpoint timeout and sets timeout to one second. It is fully reversible and typically takes about 5 minutes to write once your worksheet is in hand.

The change touches the Body Control Module (BCM), and your F-Config worksheet lists all 1 as-built code row with the module, address, and target value. Each row includes a blank for your original value so you can back up before writing changes and roll back later. Quickly cuts power outlet output after shutdown on supported trucks.

Why F-150 owners use it

Quickly cuts power outlet output after shutdown on supported trucks

Worksheet rows

1

Modules

1

Estimated time

~5 min

Compatibility

2015-2020

How you'll apply Powerpoint Timeout - 1 Second

The DIY process from start to finish — backup-first and, where possible, reversible.

1

Back up your originals first

Before changing anything, use FORScan to read and record the current value of each of the 1 row in the Body Control Module (BCM). Your worksheet leaves a blank beside every row for exactly this.

2

Write the worksheet values

Enter the 1 target row from your worksheet one at a time. Most owners finish Powerpoint Timeout - 1 Second in about 5 minutes with a laptop and a FORScan-compatible OBD-II adapter.

3

Cycle the ignition and verify

Turn the key off and back on, then confirm the change behaves as expected before moving on. If anything looks off, stop and compare against the originals you recorded.

4

Roll back anytime

Because Powerpoint Timeout - 1 Second is fully reversible, you can put every original value back later and return to stock whenever you want.

Compatible F-150 years

Review year-specific FORScan worksheet context before adding this mod to your build.

Before you write values

Make backups, confirm the adapter can see the truck, and review the FAQ before applying worksheet values.

Printable worksheet preview

Customers get a clean worksheet with original-value blanks, target values, completion checks, and module notes.

ModuleAddressTarget valueNotes
BCM726-39-010001 x1xx xxxxSpreadsheet references DeltaNu1142 powerpoint timeout calculator for custom values

Risk and safety notes

Convenience-oriented worksheet item that still requires backups, review, and customer judgment.

Required modules

Body Control Module (BCM)

Powerpoint Timeout - 1 Second FORScan FAQ

Is Powerpoint Timeout - 1 Second safe to do on my F-150?

It is rated lower risk on F-Config. It is convenience-oriented, but you should still back up your original as-built values before writing anything.

Is Powerpoint Timeout - 1 Second reversible?

Yes. This change is fully reversible as long as you record your original as-built values first. Your worksheet leaves a blank for each original value so you can roll back to stock.

Which modules does Powerpoint Timeout - 1 Second change?

It writes 1 code row to the Body Control Module (BCM). Each row is listed in your worksheet with its address and target value.

How long does Powerpoint Timeout - 1 Second take with FORScan?

Most owners finish Powerpoint Timeout - 1 Second in about 5 minutes once they have the worksheet, a laptop, and a FORScan-compatible OBD-II adapter.

What F-150 years does Powerpoint Timeout - 1 Second work on?

Powerpoint Timeout - 1 Second applies to 2015–2020 F-150 trucks. Compatibility can still vary by trim, package, and module software version, so confirm against your own as-built data.

Related SYNC & Media mods

Other FORScan changes in the same category you can add to the same worksheet.